G202MP Grayscale Modality LCD Monitor

G202MP Grayscale Modality LCD Monitor

Welcome to a Biomedical Battery specialist of the Philips Battery

Modalixx G202MP is the ultimate grayscale High Bright medical LCD solution for modality CRT monitor replacement. G202MP will Auto Sync to any legacy grayscale or color analog modality and up-scales it to clear, sharp, and vivid high bright 2 mega pixel resolution. Armed with a complete set of input options, G202MP is compatible to nearly all medical modality applications.

Replacing grayscale legacy modality Medical CRT monitors to medical LCD displays has never been easier. Covering Cath Lab, MRI, CT, R&F rooms, C-Arm, Portable X-Ray, and Nuclear Medicine applications. Modalixx display series with battery like Philips 989803135861 Battery, Philips M4605A Battery, Philips IntelliVue MP20 Battery, Philips IntelliVue MP30 Battery, Philips IntelliVue MP40 Battery, Philips IntelliVue MP50 Battery, Philips IntelliVue MP60 Battery, Philips IntelliVue MP70 Battery, Philips IntelliVue MP90 Battery, Philips IntelliVue M8001A Battery, Philips IntelliVue M8002A Battery, Philips IntelliVue M8100 Battery are compatible with many manufacturers such as: GE, Siemens, Toshiba, Shimadzu, Philips and other modalities.

Modalixx G202MP medical LCD is capable of accepting any combination of BNC connections, including single to 5 BNC, as well as D-SUB 15. At any resolution from 525-1600 horizontal pixels, G202MP can accept from low line to high line video signals through BNCs or VGA (D-sub15) inputs.
High-Resolution Digital Image from a 2MP High Contrast LCD with Special Image Enhancement Firmware.
• Analog signals converted to high resolution
• Accepts any signal from 525 to 1200 lines
• Wide viewing angles
• High 1000 cd/m² brightness
• 1500:1 contrast ratio
• 25ms response time
• User-friendly OSD
• Low Power consumption
• 110/220 Vac 60/50 Hz
• Distinctive aluminum and magnesium alloy housing for added strength
• 2MP grayscale display

We provide mounting solutions for all modality types including but not limited to MRI, CT, X-Ray, DR, CR, Cath Lab, R&F rooms, Mobile C-Arms, Portable X-Ray DR/CR, PET, and Nuclear Medicine applications. Please contact us for any mounting solutions you may require.

Modalixx 2MP High Contrast LCD with universal monochrome CRT replacement compatibility.

Z6 Digital Ultrasound Diagnostic Imaging System

Z6 Digital Ultrasound Diagnostic Imaging System

Welcome to a Biomedical Battery specialist of the Mindray Battery

The Z6 portable color Doppler ultrasound system is an excellent choice that migrates features from a traditional color Doppler ultrasound platform into an elegant, compact design. Mindray has accomplished this with economics in mind. Inherited from our remarkable design and success, the Z6 system with battery such as Mindray PM9000 Battery, Mindray LI23S002A Battery, Mindray T5 Battery, Mindray T6 Battery, Mindray T8 Battery, Mindray LI23S001A Battery, Mindray VS800 Battery, Agilent A3 Battery, Agilent ADI Battery, Biocare HYLB-722 Battery, Biocare ECG-6010 Battery, Edan HYLB-727 Battery will offer you amazing image quality and functionality with refreshing experience.

Evaluating patients in today’s demanding environment takes innovative technology to speed up diagnosis with greater confidence. Mindray’s Z6 versatility expands your clinical utility while improving patient care.

With powerful user-defined presets, auto image optimization and a patient information management system, Z6 makes it fast and easy to complete exams. Furthermore, Z6 provides onboard reporting and DICOM 3.0 which will greatly improve your workflow without any compromise in diagnosis accuracy.

Key Features

•Dynamic beam forming
•iBeam™: spatial compounding imaging
•iClear™: speckle reduction imaging
•(PSHI) Tissue Harmonic Imaging
•(TSI) Tissue Specific Imaging
•B Steer, Trapezoid Imaging, Colorization
•iScape™: panoramic view
•A smart new shape for enhanced mobility that is compact and lightweight
•Lightweight and durable transducers for multi modality imaging

•Quick Save One push image transfer to local or directly to USB
•iTouch™: one button image optimization
•iZoom™: enables accurate viewing of image from distance
•iStation™: clipboard, onboard reporting
•IMT: auto-measurement of carotid intimal-medial thickness
•Onboard reporting
•15″ high definition LCD, tilt display
•Backlit control panel
•Lithium-ion battery”

Mindray Accutorr V Vital Signs Monitor

Mindray Accutorr V Vital Signs Monitor

Welcome to a Biomedical Battery specialist of the Mindray Battery

The latest Accutorr V vital signs monitor is an easy to use, non-invasive blood pressure monitor with more features and capability. This medical equipment comes equipped with a recorder, lithium ion battery and your choice of SpO2 technology including Masimo SET®, Nellcor® OxiMax® and DPM SpO2.

The Accutorr V can store up to 1200 measurements which are easily accessible by patient ID through bar code technology. By using the Accutorr CS Charting Solution you can conveniently connect the Accutorr V to your facility’s EMR.

If you seek maximum flexibility, high value, and reliability to meet your vital signs monitor requirements, then look no further than the Accutorr V monitoring solution.

Accutorr V features:
•Light weight, portable monitor features large bright LEDs easily read from any vantage point and with battery such as Nihon Kohden PVM-2700 Battery, Nihon Kohden PVM-2701 Battery, Nihon Kohden PVM-2703 Battery, Nihon Kohden ECG-1150 Battery, Nihon Kohden ECG-1950 Battery, Nihon Kohden ECG-9620P Battery, Nihon Kohden ECG-6951E Battery, Mindray MEC1000 Battery, Mindray MEC2000 Battery, Mindray MEC1200 Battery, Mindray PM8000 Battery, Mindray PM7000 Battery
•Dedicated buttons for each primary function promotes ease of use
•The Accutorr V offers up to 9 hours of run time on a fully charged battery
•Standard features include NIBP, SpO2, recorder, high resolution LCD display, pulse strength indicator, pulse waveform and a built-in power supply with lithium ion batteries
•Highly visible alarm light enables instant visualization of alarm conditions
•Easily configurable settings include patient size, interval time, alarms, inflation pressure, audio levels and temperature formats
•Quick connect, single hose fittings
•Unique flexible database stores up to 1200 readings instantly accessible by patient ID
•With Accutorr CS Charting Solution software, wirelessly link the Accutorr V at the point-of-care to the clinician and to a hospital information system’s EMR

Available options include:
•Masimo SET® motion tolerant SpO2
•Nellcor® OxiMax® SpO2
•DPM SpO2
•DPM SmarTemp™ temperature
•Welch Allyn® SureTemp®
•Bar code scanner

Medicapture USB300 Video Recorder

Medicapture USB300 Video Recorder

Welcome to a Biomedical Battery specialist of the Biocare Battery

The MediCap USB300 is the medical equipment industry’s most affordable and user friendly high definition (HD) recorder. Record up to two weeks of HD video on the internal hard drive or choose to record directly to a convenient USB flash drive. Experience uncomplicated, affordable HD video without the clutter of DVD disks and with battery such as Biocare HYLB-683 Battery, Biocare ECG-1210 Battery, Biocare ECG-1200 Battery, Biocare ECG-300 Battery, Biocare ECG-100 Battery, Biocare HYLB-293 Battery, Nihon Kohden BSM-2350 Battery, Nihon Kohden X062/YS-076P5 Battery, Nihon Kohden I 2300 Battery, Nihon Kohden I 2301A Battery, Nihon Kohden SB-201P Battery, Nihon Kohden X076 Battery.

Works with All Medical Cameras

Record HD video from a variety of medical devices including endoscope, arthroscope, surgical camera, ultrasound, etc., and save to an internal hard drive or external USB flash drive. Can be accessed via any computer on your network.

Intuitive Use

Most users never look at the manual. It’s that easy to employ. Just plug it in and go. Record procedures within minutes of opening the box.

Medical Grade

The steel case and fluid resistant front panel mean the MediCap is built to withstand the rigors of the OR.

So compact it will fit on any cart.

ODM TTK 720 Fiber Optic Test Kit Inspection

ODM TTK 720 Fiber Optic Test Kit Inspection

Welcome to a Biomedical Battery specialist of the Juniper Battery

The TTK 720 kit provides test technicians and contractors with an all-in-one solution to their fiber optic testing needs. Built around the robust functionality of the VIS 300C-PM-02 platform, this kit ensures that fiber optic test results can be gathered and reported using simple, efficient processes.

The VIS 300C-PM-02-V is an inspection and test platform with onboard Optical Power Meter (OPM) and Visual Fault Locator (VFL) with battery such as Juniper 12523 Battery, Juniper LHJBT-H11U Battery, Juniper VSH-H11U Battery, Juniper Allegro CX Battery, Juniper VR-151 Battery, Juniper GP VR151 Battery, Juniper Allegro MX Battery, Juniper Maxell M3614 Battery, Juniper Polaroid PR-632 Battery, Juniper AMX-1 Battery, Juniper AMX-2 Battery, Juniper AMX-5 Battery. All functions of the VIS 300C platform are controlled via the 5-inch touchscreen and ODM’s proprietary inSpecTM software. Using this system, users can save test results, create closeout reports in the field, and send results wirelessly with a Wi-Fi connection.

The VIS 300C system includes a high-definition inspection scope with interchangeable inspection tips and a hardware button to initiate automated analysis of fiber endfaces. ODM includes several automated analysis profiles meeting IEC 61300-3-35 standards, making the system ideal for all fiber types commonly found in telecom industry infrastructure.

The TTK 720 contains a complete system of “one-click” dry cleaners and lint-free wipes with fiber optic-grade solution for wet/dry cleaning. When used correctly, these tools can clean endfaces to meet the IEC 61300-3-35 industry standard.

Using the onboard OPM and included DLS 355 dual laser source along with single mode test jumpers, users can gather dB loss and/or dBm power readings on single mode fiber. Results are saved directly to the VIS 300C system for field viewing and editing.

Fujikura FSM-18R Four-Fiber Fusion Splicer

Fujikura FSM-18R Four-Fiber Fusion Splicer

Welcome to a Biomedical Battery specialist of the Fujikura Battery

The FSM-18R fusion splicer is a 4-fiber ribbon splicer with similar versatility and robust nature of the Fujikura 12-fiber ribbon splicer. Well-suited for FTTx or LAN applications, the FSM-18R fusion splicer can splice up to 4 fibers, as well as single fibers. The enhanced robust features provide resistance to shock, dust, and rain to minimize downtime and improve operational performance and withstands a 30 inch drop test.

Automated features such as auto-start splicing, auto-start tube heater operation, automatic ribbon fiber identification, and auto-arc calibration reduce operational steps and improve splicing performance. Additional improvements include automatic image orientation when switching the dual position monitor with battery like Fujikura BTR-08 Battery, Fujikura 11HR-4/3FAU Battery, Fujikura FSM-18R Battery, Fujikura FSM-18S Battery, Fujikura FSM-60R Battery, Fujikura FSM-60S Battery, Omron HBP-3100 Battery, Edan M8A Battery, Edan SE-300G Battery, Edan SE-300 Battery, Biocare ECG-9801 Battery, Biocare LBP144 Battery, a large capacity battery option and the ability to charge the battery during splicer operation.

New software included with each splicer provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.

Features
•Rugged construction providing shock, dust and moisture resistance
•Dual monitor position with automatic image orientation
•Automatic arc calibration and ribbon fiber identification
•Auto-start tube heater
•Color LCD display and anti-reflective coating for excellent visibility in bright sunlight
•Simultaneous battery charge and splicer operation
•Long life battery (up to 90 splice/heat cycles per charge)
•Detachable work table incorporated into the transit case
•Software upgrades through PC application via the internet

Rohde Schwarz SMIQ03B Vector Signal Generator

Rohde Schwarz SMIQ03B Vector Signal Generator

Welcome to a Biomedical Battery specialist of the Rohde Schwarz Battery

The B series of Signal Generator Family R&S SMIQ for analog and digital modulation from Rohde & Schwarz offers solutions for today and tomorrow. In particular, this series takes into account future developments in the field of 3rd-generation digital mobile radio.

The R&S SMIQ family comprises four models that differ in their upper frequency limits. These models with battery like Tektronix Battery, Rohde Schwarz EB200 Battery, Rohde Schwarz FSH8 Battery, Rohde Schwarz FSH4 Battery, Rohde Schwarz HA-Z204 Battery, Rohde Schwarz Battery, Anritsu 633-75 Battery, Yokogawa AQ7270 Battery, Yokogawa AQ7275 Battery, Yokogawa Battery, NetTEST CMA4000i Battery, NetTEST CMA8800 Battery feature a hitherto unrivalled versatility regarding signal generation and signal quality and are therefore ideal for use in development and type-approval testing. With their outstanding price/performance ratio, these signal generators are also economically attractive for applications in production. The wide frequency range from 300 kHz to 6.4 GHz covers all major radio bands including the IF ranges.

The high-grade I/Q modulator fitted as standard ensures minimum error vector magnitude and high intermodulation suppression.

Using modern digital signal processor (DSP) technology, the versatile concept allows the generation of high-precision digital modulation signals at high bit rates without any limitations on modulation modes or standards. In addition to digital modulation, the signal generators provide the full range of analog modulation modes as well as simultaneous modulation capability.

Features:
•Wide output frequency range from 300 kHz to 6.4 GHz
•High (up to 16 dBm) and precise output level (<0.5 dB)
•Fast setting time for frequency (<3 ms) and level (<2.5 ms) (Without switching the mechanical attenuators)
•Frequency hopping (500 µs)
•High spectral purity (typ. -130 dBc (1 Hz) at 1 GHz and 20 kHz carrier offset)
•RF, AF and level sweep (user-programmable)

Anritsu BTS Master MT8221B Base Station Analyzer

Anritsu BTS Master MT8221B Base Station Analyzer

Welcome to a Biomedical Battery specialist of the Anritsu Battery

Anritsu BTS Master MT8221B Base Station Analyzer:
•Cable & Antenna Analyzer (400 MHz to 4.0 GHz )
•Spectrum Analyzer (150 kHz to 7.1 GHz)
•Power Meter (10 MHz to 7.1 GHz)

The BTS Master MT8221B is Anritsu's high performance base station analyzer with battery such as Anritsu MT9081 Battery, Anritsu MT9081D Battery, Anritsu MT9082 Battery, Anritsu 9081D Battery, Anritsu Z0921A Battery, Anritsu MT9083 Battery, Anritsu MT9083B Battery, Anritsu MT9083A8 Battery, Anritsu CMA-4500 Battery, Anritsu CMA-4500 Battery, Tektronix YBT250 Battery, Tektronix TFS3031 Battery. From the ground up it has been designed to support 4G standards and installed 2G/3G networks. The MT8221B's platform provides a 20 MHz demodulation capability to support LTE bandwidths from 1.4 to 20 MHz. It also features a 30 MHz Zero-Span IF Output for external demodulation of virtually any other wideband signal. In addition, a Vector Signal Generator option is available for comprehensive receiver testing capability with the flexibility to generate two modulated signals plus noise.

Included Options:
•Option 10: Bias-Tee
•Option 19: High-Accuracy Power Meter (power sensor req.)
•Option 23: Vector Signal Generator
•Option 25: Interference Analyzer (recommend Opt. 0031)
•Option 27: Channel Scanner
•Option 31: GPS Receiver (requires antenna)
•Option 33: CDMA OTA Measurements (req. Opt. 0031)
•Option 34: EV-DO OTA Measurements (requires Option 0031)
•Option 35: W-CDMA/HSPA+ Over-the-Air Measurements
•Option 37: Mobile WiMAX OTA Measurements (rec. Opt. 0031)
•Option 38: TD-SCDMA/HSDPA Over-the-Air Measurements
•Option 40: GSM/EDGE RF Measurements
•Option 24: I/Q Waveform Capture
•Option 41: GSM/EDGE Demodulation
•Option 42: CDMA RF Measurements
•Option 43: CDMA Demodulation
•Option 44: W-CDMA/HSPA+ RF Measurements
•Option 46: Fixed WiMAX RF Measurements
•Option 47: Fixed WiMAX Demodulation
•Option 60: TD-SCDMA/HSPA+ RF Measurements
•Option 61: TD-SCDMA/HSPA+ Demodulation
•Option 62: EV-DO RF Measurements
•Option 63: EV-DO Demodulation
•Option 65: W-CDMA/HSPA+ Demodulation
•Option 66: Mobile WiMAX RF Measurements
•Option 67: Mobile WiMAX Demodulation
•Option 89: Zero-Span IF Output
•Option 90: Gated Sweep
•Option 431: Coverage Mapping (requires Option 0031)
•Option 541: LTE RF Measurements (BW = . 10 MHz)
•Option 542: LTE Modulation Measurements (BW = . 10 MHz)
•Option 543: 15 MHz and 20 MHz, LTE Modulation Measurements
•Option 546: LTE Over-the-Air Measurements (rec. Opt. 0031)
•Option 551: TD-LTE RF Measurements (BW = . 10 MHz)
•Option 552: TD-LTE Modulation Measurements (BW = . 10 MHz)
•Option 556: TD-LTE Over-the-Air Measurements
•Option 51: T1 Analyzer (mutually exclusive w/ Opt 0052, 0053)

Anritsu Network Master Pro MT1000A

Anritsu Network Master Pro MT1000A

Welcome to a Biomedical Battery specialist of the Anritsu Battery

Anritsu Network Master Pro MT1000A Tester

Included Options:
•MT1000A-003: Connectivity for WLAN/Bluetooth
•MU100010A: 10G Multirate Module
•MU100010A-001: Up to 2.7G Dual Channel

The MT1000A is a powerful and full toolset for testing OTN signals. It supports complete Bit Error Rate (BER) tests with bulk signals at the OTN level as well as tests all the way to the Ethernet, CPRI, Fibre Channel, and SDH/SONET client signals mapped into the OTN signal.

Communication networks are becoming more and more sophisticated as leading network operators install new technologies like OTN, MPLS-TP, and Ethernet in their metro and mobile backhaul networks as well as CPRI/OBSAI in mobile fronthaul networks. In some cases, operators must also support Fibre Channel links, while still keeping legacy technologies like SDH/SONET and PDH/DSn operational. The Network Master Pro MT1000A redefines the direction of future test platforms by bringing these network test requirements to a portable device, making it the ideal tool for field testing.

The compact, battery-powered and easy-to-use Anritsu MT1000A with battery like Anritsu S312D Battery, Anritsu S331C Battery, Anritsu S332C Battery, Anritsu S325D Battery, Anritsu S412D Battery, Anritsu S810C Battery, Anritsu S810D Battery, Anritsu S820B Battery, Anritsu S820C Battery, Anritsu MS2711B Battery, Anritsu MS2711D Battery, Anritsu MT8212B Battery is available with 10G Multirate Module MU100010A; everything in a single, handy tester needed to install and maintain communication networks from 1.5Mbps to 10Gbps. This portable, compact, lightweight instrument makes network field testing easy. Service engineers can read and interpret data from the tested network directly on the 9-inch color display with easy-to-understand indications and graphical symbols. And the GUI makes it simple to configure and operate the instrument at its full potential. The MT1000A has been designed for easy expandability, reducing initial costs, and facilitating step-by-step customized investment.

All-in-one field transport tester; supports testing from 1.5Mbps to 10Gbps
•Metro and core networks OTN installation and maintenance
•Carrier Class Ethernet installation and troubleshooting
•Mobile backhaul installation and verification
•Mobile fronthaul installation and verification
•Powerful Storage Area Networking (SAN) testing
•Quick and easy testing of SDH/SONET and PDH/DSn networks

Features:
•Testing of client signals mapped into OTN
•Easy and intuitive GUI
•Dual port at all rates
•WLAN*/Bluetooth*/LAN connectivity
•PDF, CSV, XML report generation for documentation of test results
•Remote operation (VNC), dedicated remote GUI software and remote control (scripting)
•Optical connector inspection

*Available for certified countries and regions including USA, Canada, Japan and all EU countries.

Anritsu MW82119B-0194 PIM Master

Anritsu MW82119B-0194 PIM Master

Welcome to a Biomedical Battery specialist of the Anritsu Battery

Anritsu MW82119B-0194 is a battery-operated, high power Passive Intermodulation (PIM) testing solution for the major wireless standards in use around the world. The PIM Master's small size and light weight, combined with battery operation such as Anritsu MS2028B Battery, Anritsu MS2027C Battery, Anritsu MS2035B Battery, Anritsu S361E Battery, Anritsu S332E Battery, Anritsu S362E Battery, Anritsu S412E Battery, Anritsu S113B Battery, Anritsu S114C Battery, Anritsu S251B Battery, Anritsu S251C Battery, Anritsu S311D Battery, make it the ideal solution for verifying PIM performance at difficult to access sites such as Remote Radio Head (RRH) installations or indoor Distributed Antenna Systems (DAS).

Measurements
•PIM vs. Time: 3rd, 5th, and 7th order intermodulation product when in receive band (user selectable)
•Distance-to-PIM: Distance and relative magnitude of mutiple PIM sources
•Swept PIM: 3rd, 5th, and 7th order intermodulation product when in receive band (user selectable)
•Noise Floor: Noise Floor vs. Time at selected IM product frequency

•Frequency: Carrier F1, Carrier F2, Intermodulation Order (3rd, 5th, 7th)
•Amplitude: Ref Value, Scale, Auto Range (On/Off), Amplitude Tone (On/Off)
•Setup: Output Power, Test Duration (1s to 1,200s)
•Limit Lines: Limit (Upper/Lower), On/Off, Limit Move, Limit Alarm (On/Off, PASS/FAIL indicator)
•GPS: On/Off, 3.3/5.0V
•DTP: Cable Velocity, Distance

•Soft Carrying Case, Screen Access
•Shoulder Strap
•Stylus with Coiled Tether
•Screen Protector Film, 8.4in
•Low PIM Adapter, 7/16 DIN(m) to 7/16 DIN(f), 50Ω
•Anritsu Software Tool Box for Handheld RF Instruments Disc
•High-capacity Li-Ion, Battery Pack
•AC/DC Power Supply (Country dependent)
•AC Power Cable
•Automotive Power Adapter, 12VDC, 60W
•Ethernet Cable, 7ft/213cm
•USB A-mini B Cable, 10ft/305cm
•Handheld Instruments Documentation Disc
•Three-year warranty (battery one-year warranty)
•Certificate of Calibration

JDSU MTS-2000 E4126LA SM OTDR

JDSU MTS-2000 E4126LA SM OTDR

Welcome to a Biomedical Battery specialist of the Acterna Battery

Hands-free testing. Hands-free case optimizing productivity whether the task is “up poles or down holes” and ensuring all the essential fiber test tools are close at hand comes standard and makes daily work for technicians easier.
Built for simplicity. Simple interface and one-touch button operation ensures straightforward use of the instrument. Results are displayed on a large high resolution color touchscreen.
Widest range of applications. The modular form factor enables to outfit the test set with the exact capabilities needed in the field. Combining such a large array of applications into one handheld test set maximizes return on investment and drives common test methods and procedures.

LAN/WAN/Metro/Access/PON OTDR applications. Ensure fast and consistent fiber deployments across your network with the SmartOTDR™ test mode.
FiberComplete application for automated Insertion Loss and ORL testing with fault finding
With battery such as Acterna FTB-100 Battery, Acterna FTB-400 Battery, Acterna MTS-5000 Battery, Acterna MTS-5000E Battery, Acterna MTS-5100 Battery, Anritsu Lite3000(E) Battery, EXFO FTB-100 Battery, EXFO FTB-400 Battery, EXFO FTB-150 Battery, EXFO FTB-200 Battery, EXFO XW-EX002 Battery, EXFO Battery
CWDM optical spectrum analyzer application
PON/FTTH selective power meter application
Digital analysis microscope inspect connectors end faces and perform IEC pass/fail analysis
Other Test Applications: optical power meter, visual fault locator and optical talkset

Large 5-inch touch screen display
Test applications include OTDR, automatic IL/ORL, CWDM analyzer, selective PON power meter and connector inspection with IEC pass/fail analysis
Built-in optical power meter, VFL and optical talkset options
New generation lithium polymer (LiPo) battery for up to 8 hours operation
Flexible connectivity with ethernet, USB, bluetooth and wifi capabilities
Special hands-free bag as standard

Anritsu MW9070B mini-OTDR

Anritsu MW9070B mini-OTDR

Welcome to a Biomedical Battery specialist of the Anritsu Battery

The MW9070B is a high-performance mini-OTDR for installation and maintenance of subscriber fiber optic lines and other fiber optic cables. It automatically detects the positions of faults in the cable and displays an event table listing faults and a trace waveform. The high-performance mini-OTDR has a large 7" screen while staying within the size of a B5 file and weighing in at only 3.2 kg.
The MW9070B is designed with a wide dynamic range and short dead zone and is indispensable for detecting faults in optical trunk lines, subscriber lines, optical CATV cables, optical LANs, and other types of fiber optic cables. In addition, it is also invaluable in measuring transmission line losses, connection losses, return loss, and other parameters. Six optical units are available, depending on the wavelength and type of optical fiber, making the MW9070B an economic choice for a wide range of applications.

Features

Compact (smaller than footprint), lightweight (3.2 kg)
Simple operation with automated fault measurement
Simultaneous waveform trace and event table display on large LCD
Built-in 3.5 inch FDD (optional)with battery like Anritsu MS2721A Battery, Anritsu MS2724B Battery, Anritsu MS2722C Battery, Anritsu MS2726C Battery, Anritsu MS2711E Battery, Anritsu MS2712EC Battery, Anritsu MT8212E Battery, Anritsu MS2024A Battery, Anritsu MS2026A Battery, Anritsu MS2036A Battery, Anritsu MS2025B Battery, Anritsu MS2026B Battery
Wide dynamic range: 41.5/39.5 dB (MW0972C)
Short dead zone (MW0972C): 3 m (fresnel), 8 m (back-scattered)
High-speed real-time sweep to check fiber connections
Manual operation for novice and experienced operation
Visual LD light source (option for units)
Emulation software runs on any personal computer under Windows environment (sold separately)
There are both Singlemode and Multimode Optical Units available

Fluke ProSim 8 Vital Signs Simulator

Fluke ProSim 8 Vital Signs Simulator

Welcome to a Biomedical Battery specialist of the Fluke Battery

The ProSim 8 Vital Signs Simulator offers unmatched, built-in capabilities, making it the choice of leading hospitals, patient monitor manufacturers, and government agencies worldwide for doing medical device quality assurance with the long life battery like Fluke BP123 Battery, Fluke BP123S Battery, Fluke BP124 Battery, Fluke BP124S Battery, Fluke BP124X Battery, Fluke Ti27 Battery, Fluke 199 Battery, Goldway G50 Battery, Goldway G60 Battery, Goldway ME202C Battery, JDSU MTS-8000 Battery, JDSU MTS-4000 Battery.

Able to simultaneously simulate a comprehensive set of physiological parameters, the ProSim 8 makes it possible to thoroughly test the functionality of patient monitoring devices in less than 5 minutes. There’s nothing extra to purchase.

Cleared by the U.S. FDA as a Class II medical device, the ProSim is backed by Fluke Biomedical, which is certified to ISO 13485, the Medical Device Quality Management System standard. Fluke Biomedical proudly originates from over 60 years of Fluke Corporation’s test and measurement expertise, and accreditation by the American Association for Laboratory Accreditation (NVLAP) to stringent ISO/IEC 17025-2005 and ANSI/NCSL Z540-1-1994 standards.

Using onboard automation, the ProSim 8 can simulate a range of patient conditions, and test multiple threshold alarms without needing to constantly push buttons. Optional Ansur test software further streamlines testing by automating exact procedures.

Everything needed for testing is in one portable device, including an optional SP02 tester, which attaches with a magnet, and a built-in onboard battery. No extraneous modules, cables or battery packs are necessary.

ProSim 8 offers the functionality of multiple simulators, with fine and granular control over each physiological parameter to support both clinically relevant measurements, and the test procedures or service requirements of medical device manufacturers.

Carry just one device to test a variety of monitor types and brands for IBP, NIBP, arrhythmia, cardiac output, respiration, temperature, ECG, fetal/maternal, SP02, pacemaker, Masimo Rainbow, and cardiac catheterization.

Fresenius Kabi Germany supports Blindeninstitut Thüringen

Fresenius Kabi Germany supports Blindeninstitut Thüringen

Welcome to a Biomedical Battery specialist of the Fresenius Battery

Christine Hensel (right), Head of Marketing Nutrition, Infusions, and Pharmaceuticals, Fresenius Kabi Germany, symbolically hands over this year’s Christmas donation to Annette Peters (center), Institute Director, and Verona Mau (left), Deputy Institute Director, from the Thuringia Institute for the Blind.​
This year’s Christmas donation from Fresenius Kabi Germany, to the amount of €20,000, goes to the Thuringia Institute for the Blind and battery such as Fresenius MCM440 PT Battery, Fresenius MCM440 OT Battery, Fresenius MCM550 ST Battery, Fresenius Optima VS Battery, Fresenius Optima ST Battery, Fresenius Optima MS Battery, Fresenius Optima PT Battery, Agilia Fresenius Kabi Battery, Fresenius RC1800AA05AA Battery, JMS SP-500 Battery, Zoncare ZQ-1201 Battery, Zoncare ZQ-1201G Battery.

The institute provides support for visually impaired children and teenagers, offering school-based education and training programs. In addition, the institute offers residential and training facilities for adults, some of whom have severe multiple handicaps. The support provided by the institute ranges from early assistance, visiting children and their families at home, to the institute’s own schools.

The institute also operates special places where adults can live and work, such as various types of housing support and a special workshop where people with multiple disabilities find meaningful work.

“We are really touched by the work and efforts of the Thuringia Institute for the Blind,” says Christine Hensel, Head of Marketing Nutrition, Infusions, and Pharmaceuticals, Fresenius Kabi Germany. “We are convinced by the organization’s holistic approach and are delighted to be supporting the institute’s vision of offering prospects to visually impaired and blind people.”

Barco Coronis LED Fusion K9602811

Barco Coronis LED Fusion K9602811

Welcome to a Biomedical Battery specialist of the GE Battery

Barco's Coronis Fusion 6MP features an exclusive LCD panel with the latest IPS technology, offering best-in-class image quality. Its high brightness and high contrast ratio help unveil the subtlest of details so you can make the most accurate diagnosis. Its large 30” screen real estate, wide aspect ratio, and full ACR compliance make this display the perfect fit for diagnostic imaging.

This display system comes with batteries like GE Eagle Monitor 1000 Battery, GE Eagle Monitor 1006 Battery, GE Responder 1000 Battery, GE Responder 1100 Battery, GE 15N-800AA Battery, Kenz HHR-38AF25G1 Battery, Kenz Cardico 1211 Battery, Osen ECG-8130A Battery, Edanins ECG-6A Battery, GE DASH 1000 Battery, GE Eagle 1000 Battery, Kenz Cardico 1210 Battery and smart features that enhance control and productivity. Unique SpotViewTM technology allows you to boost the luminance in a region of interest while dimming the surrounding image area so you can focus on more details more efficiently. Like all of Barco's medical display systems, Coronis Fusion 6MP comes with MediCal QAWeb, a cloud-based technology for automated calibration and Quality Assurance to ensure maximum uptime of the display with no need for human intervention.

With Coronis Fusion 6MP, switching between workstations becomes a thing of the past. Especially designed for multimodality imaging, this diagnostic display combines CT, MR, orthopedic images, or any other combination on a single screen – for an uninterrupted workflow. You can use the single-head workstation as two bezel-free heads or as one wide-screen workspace. The choice is yours. Its widescreen, ergonomic form factor, wide viewing angle, and DimViewTM feature (to automatically dim auxiliary displays) have been designed for the way you work and help you focus on the smallest image details.

Barco medical displays include proprietary display controllers that are validated with the latest workstations and with all major PACS applications. All components are under the full 5-year warranty (including the display backlight) for complete peace of mind.

Barco Coronis MDCC-6430 6MP LED Color Fusion Diagnostic Display Sys, 6MP, 1-Head, MXRT-5600 PCIe Card. CORONIS 6MP FUSION COLOR MXRT5600. 5 year manufacturer's warranty.

SureFlow Adaptive Offset Controller 8681

SureFlow Adaptive Offset Controller 8681

Welcome to a Biomedical Battery specialist of the TSI Battery

The TSI SureFlow™ Adaptive Offset Controller Model 8681 is an ideal digital controller for laboratories with fume hoods.

A stand-alone device, the 8681 ensures that the exhaust volume is always greater than the supply volume for negative spaces, and less than the supply volume for positive spaces. This negative air balance helps ensure that chemical vapors cannot diffuse outside the laboratory, complying with requirements in NFPA 45-2000 and ANSI Z9.5-2003.

The SureFlow 8681 with battery such as Li202SX Battery, Li202SX-6600 Battery, Li202SX-66C Battery, Li202SX-7200 Battery, Li202SX-7800 Battery, Li202SX-78C Battery, TSI 8240 Battery, TSI 9130 Battery, TSI 9550 Battery, TSI 9510BD Battery, TSI AEROTRAK APC 9510-02 Battery, Zoncare BAT-120003 Battery also controls the temperature of the laboratory space by modulating reheat and the supply air volume. Optionally, a room pressure sensor can be connected to the 8681 controller to correct long-term changes in the building dynamics.
The 8681 uses TSI's unique through-the-wall pressure sensor to provide closed-loop control of the pressure differential. The pressure sensor slowly resets the offset between the supply and exhaust flows.
The 8681 easily integrates to the building management system using either alarm relays or digital communications. The 8681 supports the open MODBUS protocol.

Features and Benefits
•Stand-alone room pressure control provides system reliability
•Integrates temperature control into laboratory ventilation control
•Flow tracking control ensures stability in the HVAC system
•Direct pressure measurement provides continuous, closed-loop control
•Audible and visual alarms warn staff of unsafe conditions
•Network communications allow for building-wide control efficiencies
•Convenient keypad and display support local programming
•Passwords prevent unauthorized access to controller functions

Applications
•Laboratories with fume hoods

Included items
•Digital interface module
•Through-the-wall pressure sensor
•Controller output cable, 25 ft
•Transformer, 120:24 VAC
•Transformer cable, 25 ft

MD211C3-DH-NEC K2000

MD211C3-DH-NEC K2000

Welcome to a Biomedical Battery specialist of the Nihon Kohden Battery

The LED-backlit NEC MultiSync MD211C3, a 21.3" 3MP color radiology monitor, features factory calibration to the DICOM standard for luminance and a 70% smaller front sensor than its predecessor.

Technology advances includes a human sensor that reduces power consumption when a user is not present. This widescreen monitor, which maintains a designated calibrated brightness, has all-digital connectors, including DisplayPort and two-port USB hub, which enable advanced connectivity for any type of workstation.

Reduces screen uniformity errors and compensates for differences in color/grayscale and luminance using new signal processing circuitry.

Allows for distortion-free display of content in various orientations, creating new application opportunities.

Provides for industry-leading low power consumption and less hazardous materials with battery like Nihon Kohden BSM-2353C Battery, Nihon Kohden BSM-2301K Battery, Nihon Kohden BSM-2351C Battery, Nihon Kohden BSM-2303C Battery, Alaris Medicalsystems SIGNATURE 2 Battery, Alaris Medicalsystems 7000 Battery, Alaris Medicalsystems 7100 Battery, Alaris Medicalsystems 7130 Battery, Alaris Medicalsystems 7200 Battery, JMS 7N-1200SCK Battery.

GammaCompMD QA offers functionality and flexibility for PACS administrators. The next generation of quality control and calibration software from NEC features support for calibration of the MD Series medical diagnostic displays, MultiSync PA Series professional desktop displays, additional reporting and a new GammaCompMD QA Network version.

Intended for the demanding medical imaging environment, GammaCompMD QA offers quality control, calibration and display matching ensuring consistent image quality. The software works with many NEC displays including the MultiSync® MD Series to maintain the monitor's conformance to the DICOM standard while providing an easy-to-use QA environment for medical imaging.

Optional, at extra cost for most other manufacturers, NEC Display Solutions will replace a defective MD211C3 using their Advanced Replacement Program, for the first 5 years after the initial purchase. If the display is defective or failing, NEC will ship a replacement display while the defective display is repaired. Your work flow does not suffer due to the repair time.

Accurate and reliable survey meters

Accurate and reliable survey meters

Welcome to a Biomedical Battery specialist of the Fluke Battery

The 451 Ion Chamber Survey meter provides the high precision accuracy you demand, with the perfect weight balance to minimize hand fatigue in long term scannning when compared to other instruments on the market.

Measure down to background level radiation with ease
The 451 models with battery such as Fluke TiXB Battery, Fluke Ti9 Battery, Fluke TiRX Battery, Fluke TiS Battery, Fluke 215C Battery, Fluke 19XC Battery, Fluke 2X5C Battery, Fluke 435 Battery, Fluke 225C Battery, Contec ECG-1200 Battery, Edan SE-1200 Battery, Contec ECG-1200 Battery offer consistently reliable measurements of beta, gamma and x-ray radiation all the way down to background levels, with an easy to use two button user interface. The auto-ranging and auto-zeroing reduces errors even further.
Talk to one of our product experts today and get your hand on the 451 Ion Chamber Survey Meter – the instrument of choice for medical physicists and radiation safety professionals around the world.
Need help choosing between models? Here’s a selection guide that can help with your decision.

Capability
Dose and dose rates down to uR/h
Measures Gammas and X-rays down to 7keV
Able to measure Beta rays
Pressurized ion chamber
Uses air ion chamber with dessicant cartridge
Sealed ion chamber technology
0-50R/h auto-ranging
0-5R/h auto-ranging
451 EXCEL tool kit compatible

EXFO MaxTester 730C Metro OTDR

EXFO MaxTester 730C Metro OTDR

Welcome to a Biomedical Battery specialist of the EXFO Battery

Fully featured, entry-level, dedicated OTDR with tablet-inspired design, suitable for metro and optimized to test through optical splitters, for seamless end-to-end FTTH characterization and troubleshooting.

The MaxTester 730C (MAX-730C) is designed for testing through FTTH/PON splitters for end-to-end characterization. This handheld OTDR is ideal for FTTH/PON testing, live fiber troubleshooting and metro range testing.

The MAX-730C Advantage
7-inch, outdoor-enhanced touchscreen with battery like EXFO FTB-1 Battery, EXFO XW-EX009 Battery, EXFO LO4D318A Battery, EXFO AXS-100 Battery, EXFO AXS-110 Battery, EXFO XW-EX003 Battery, Acterna ANT-5 Battery, Acterna MT9090 Battery, Acterna MT9090A Battery, Acterna 909815B Battery, Acterna G0202A Battery, Acterna PT01496 Battery
Optimized to test through optical splitters and characterize FTTH links
Characterize and troubleshoot links up to 100 km with a dynamic range of 39 dB
Find more problems closer to the splitter than other OTDRs thanks to the highest resolution for PON testing and the shortest PON dead zone available

Key Features
Handy, lightweight, powerful, tablet-inspired design
7-inch, outdoor-enhanced touchscreen–the biggest in the handheld industry
12-hour autonomy
Dead zones: EDZ 0.6 m, ADZ 2.5 m
Dynamic range: 39/38/39 dB
Rugged design built for outside plant
iOLM-ready: intelligent and dynamic application that turns complex OTDR trace analysis into a one-touch task

Applications
FTTx/PON testing though splitters (up to 1x128)
Access network testing (P2P)
Metro links testing (P2P)
Live fiber troubleshooting

Mindray V21 Patient Monitor

Mindray V21 Patient Monitor

Welcome to a Biomedical Battery specialist of the Mindray Battery

The V Series patient monitor is medical equipment representing the result of research focused on identifying the unique challenges of critical care and other high acuity environments. This device is tested and proven in a true environment by the end users who understand the complexities and workflows of a contemporary medical facility.

Mindray V21 addresses the need for more effective care without information overload and unnecessary alarms, simply focusing on the most important information. An advanced monitoring system, it provides a unique blend of familiar parameters and a sustainable platform enabling the future expandability benefiting 21st century healthcare institutions.

This patient monitoring system with battery such as Mindray D3 Battery, Mindray LI24I001A Battery, Mindray D6 Battery, Mindray LI34I001A Battery, Agilent N2910AM Battery, Agilent N3900 Battery, Agilent N3985A Battery, Philips ME202H Battery, Li202S-60A Battery, Li202S-66C Battery, Li202S Battery, Agilent N3993A Battery has the flexibility and adaptability for clinicians’ changing environments and gives users an advanced device employable anywhere in their facility. The system also provides immediate connectivity through its thread safe VAccess application, bringing the user in touch with patient data streams including electronic medical records at a single location, without compromising the patient.

V21 Highlights
•V21 with integrated touchpad and sizeable display delivers exceptional clarity of data, making it an effective clinical bedside tool
•V21 touchscreen display is highly flexible with many configurable layouts. View as many as 24 waveform simultaneously using a secondary display
•System elements are interchangeable making it impressively convenient and affordable to maintain
•Modern user interface eliminates common difficulties encountered with traditional monitors
•Consistent navigation across monitors minimizes the learning curve, saving valuable clinical time and effort
•Using the VPS Module, data follows the patient throughout the course of care,creating a continuous medical record
•Powerful VAccess enables remote patient data streams to be accessed at a single location, without compromising the monitor of patients
•Modular design is fully scalable to meet the needs of each care unit
•Integrated wireless capability establishes an expandable and robust platform
•Color-coded patient connectors, with unique key-code feature, help clinicians to quickly respond to a patient’s changing condition

Dual Head 5MP Barco Coronis Grayscale

Dual Head 5MP Barco Coronis Grayscale

Welcome to a Biomedical Battery specialist of the Philips Battery

The high-grade Coronis 5MP display system offers unsurpassed film-like images with ultra-high resolution, luminance and contrast . The 21.3” LED provides unequaled image quality without pixelization, a wide viewing angle and perfect geometry.

Grayscale technology perfected

Building on proven technology, Barco's Coronis 5MP provides ultimate precision and performance. The advanced 10-bit architecture ensures accurate image representations with 1024 simultaneous shades of gray out of a palette of 4096.

Transparent calibration and Quality Assurance

The Coronis 5MP with battery like Philips VS2+ Battery, Philips 863266 Battery, Philips 989803166291 Battery, Welch Allyn 4500-84 Battery, Welch Allyn 450EO Battery, Welch Allyn 450TO Battery, Welch Allyn 45MTO Battery, Welch Allyn 45NTO Battery, Kaden Yasen WP-YHD-3160 Battery, Kaden Yasen ECG-901 Battery, Kaden Yasen HYHB-1270 Battery is bundled with MediCal QAWeb for automated calibration and QA, ensuring continuous diagnostic quality and maximum uptime of your workstation. MediCal QAWeb allows you to continue diagnoses while automated QA checks are being executed. The system also includes a secure online web service for remote, centralized image quality management.

Worry-free DICOM compliance under all lighting conditions

The integrated I-Guard continually guards and adjusts the luminance output of the diagnostic viewing area. Combined with the MediCal QAWeb software, the patented I-Guard brings fast and easy calibrations, automatic Quality Assurance testing and remote diagnoses of the display.

The intelligent Ambient Light Compensation (ALC) system assures that the Coronis 5MP remains DICOM compliant under all lighting conditions by adapting their brightness relative to the ambient light conditions.

• Lowest cost of ownership
• Continuous DICOM-compliant imaging thanks to integrated I-Guard technology
• High contrast ratio and luminance for superior image quality in all environments
• Online system for continuous Quality Assurance
• Available as single- and multi-head systems
• Ergonomic design with protective front cover
• Real plug and play

Diagnostic 3MP Radiology Workstation

Diagnostic 3MP Radiology Workstation

Welcome to a Biomedical Battery specialist of the Philips Battery

Your personally tailored workstation is the latest HP or Dell hardware with a choice of BARCO, DOME, EIZO, NEC or TOTOKU 3MP diagnostic display(s).

The Diagnostic3™ system provides superior performance in a mini-tower package with a medical grade, 3MP DICOM grayscale or color, LCD single or dual head display with battery such as Philips VM1 Battery, Philips VSI Battery, Aspect BIS Vista Battery, Edanins ECG-12A Battery, Edanins HYHB-1188 Battery, Fukuda BTE-001 Battery, Fukuda FX-8222 Battery, Mindray LI13I001A Battery, Mindray IMEC8 Battery, Mindray IMEC10 Battery, Mindray IPM12 Battery, Mindray IEMEC12 Battery. With an administrative 22 inch color LCD included with the system making multi-tasking is easy

Diagnostic interpretation of: CT, MRI, Ultrasound, Nuclear Medicine, Computed Radiography and Digitial Radiography and all PACS applications.

The Diagnostic3™ system includes:

Your choice of a BARCO, DOME, EIZO, NEC or TOTOKU 3MP DICOM monochrome or color LCD display which have a list price of up to $13,000 for less than $7,000 for a complete Single Head workstation system. Dual head configurations in factory matched pairs with list prices up to $20,000 for less than $12,000.

Dell T3600 workstation with 3GHz CPU

8GB of RAM memory

22 inch Color Administrative LCD monitor

2 x 500GB RAID, 7200 RPM Hard Drives

16X DVD+/-RW SATA DVD-ROM Drive

Two PCI video card slots and two PCI Express video card slots

Energy Smart Settings

Windows 7 Professional

5 Years of Next Business Day Parts and Labor On-Site Response Service After Remote Diagnosis on the workstation

List Price for Single Head Configuration are up to $15,000.00. Your selling price starting well under $7,000.00. “Hot Swap”, 5 years of pro active replacement if the display starts to fail is either standard or optional depending on the display manufacturer.

AGILENT TECHNOLOGIES 1147B Current Probe

AGILENT TECHNOLOGIES 1147B Current Probe

Welcome to a Biomedical Battery specialist of the Tektronix Battery

Key Features & Specifications

•Wide bandwidth: DC to 50MHz
•High S/N ratio, low current measurement capability
•15A peak, 15 ADC, 10 Arms continuous, 30A peak non-continuous
•Easy protect function at excessive input
•Demagnetizing switch to remove any residual magnetism that builds up in the magnetic core
•Compatible with high impedance AutoProbe interface
•For use with 80000/90000 Series, use N278xA current probe with N2779A power supply and E2697A high impedance adapter
•For use with 90000 X-Series, use the N5449A high impedance probe adapter with battery like Tektronix Y350C Battery, Tektronix Y400 Battery, Rohde Schwarz FSH626 Battery, Rohde Schwarz FSH-Z32 Battery, Rohde Schwarz FSH6 Battery, Rohde Schwarz FSH18 Battery, Rohde Schwarz FSH3 Battery, Biocare ECG-9803G Battery, Biocare HYLB-114A Battery, Aspect 185-0152 Battery, JDSU Acterna MTS-6000 Adapter, Aspect VTI 14564 Battery

Description

The Keysight 1147B is a wide bandwidth, active current probe for InfiniiVision and Infiniium oscilloscopes.
The probe features flat bandwidth (DC-50MHz), low noise ( < 2.5 mA rms ) and low circuit insertion loss.
The 1147B is ideal for capturing transient current signals such as those found in motor controllers, switching power supplies, inverters and current amplifiers driving inductive loads.
The 1147B is the replacement of the 1147A. The 1147A is now discontinued. The 1147B is 100% form, fit, function and price equivalent to the 1147A.

Agilent N2863B Low-cost Passive Probe

Agilent N2863B Low-cost Passive Probe

Welcome to a Biomedical Battery specialist of the Agilent Battery

Description

The Agilent N2863B low-cost passive probe provides a 10:1 attenuation and features a high input resistance of 10 MΩ. The probe can be adjusted for low-frequency compensation and high-frequency compensation.

For the best measurements you should compensate your probe to match its characteristics to the oscilloscope.

The N2863B is a replacement of the N2863A. The N2863A with battery such as Agilent E6000A E6000B E6000C Adapter, Agilent N9915A Battery, Agilent N9916A Battery, Agilent N9917A Battery, Agilent N9927A Battery, Agilent N9937A Battery, Anritsu MT9082A2 Battery, Anritsu MT9082A8 Battery, Anritsu MT9082C9 Battery, Anritsu MT9082A2 Battery, Anritsu MT9080 Battery, Anritsu MT9080D Battery will be discontinued in June 2011 and will be supported for 5 years until September 2016. The old and new replacements are 100 orm, fit, function and price equivalent to the products they replace.

Available replacement parts

Key Specification
• Compatible with 1000, 3000, 5000, 6000, and 7000 Series oscilloscopes.
• Cable length 1.2 m
• Bandwidth DC to 300 MHz
• Risetime 1.16 ns
• Attenuation ratio 10:1
• Input resistance 10 MΩ (when terminated into 1 MΩ)
• Input capacitance ≈12 pF
• Maximum input 300 V RMS